Brite-Line Technologies - Pavement Marking Tapes

Brite-Line® Technologies is a worldwide manufacturer and marketer of removable, durable and intersection grade road-marking tapes. Since 1986, Brite-Line products have undergone extensive laboratory and field testing, developing a highly successful track record of commercial installations throughout the United States, Europe and Asia.

DURABLE PAVEMENT MARKING TAPES

The Brite-Line 1000 Durable is a highly reflective tape, consisting of specially formulated polymer resins, pigments and fillers, which provides outstanding durability under the heaviest traffic conditions. The tape can be surface-applied (overlay) or inlaid, with no heat or solvents required.

The Brite-Line 2000 Intersection provides motorists with the most durable intersection grade markings on the heaviest traveled roadways. These tapes have superior durability and excellent nighttime reflectivity. The unique adhesive system resists tearing or movement at intersections, while the tough urethane surface increases durability and color stability.

REMOVABLE PAVEMENT MARKING TAPES

Brite-Line 100 Removable road marking tape provides a bright, well-delineated channel to guide motorists safely through construction zones and workers' operating areas. It comes up cleanly - completely intact or in large pieces, without damage to road surfaces.

It is easily and quickly installed and thus it reduces the need for road closures. Brite-Line 100 Removable is the ideal solution to all your temporary roadway marking requirements.

The Brite-Line VR 150 meets requirements for the P2, Type II traffic category.

It also meets following categories according to DIN EN 1436:

• Skid resistance - S1
• Night visibility-dry road - R3
• Night visibility-wet road - RW3
• Daytime visibility - Q2
• Color coordinates - Y1

The Brite-Line VRC II 400 meets requirements for the P4, Type II traffic category. It also meets the following categories according to DIN EN 1436:

• Skid resistance - S1
• Night visibility-dry road - R3
• Night visibility-we road - RW3
• Daytime visibility - Q2
• Color coordinates - Y1

The Brite-Line VR 501 meets requirements for the P6, Type II traffic category. It meets the following categories according to DIN EN 1436:

• Skid resistance - S2
• Night visibility-dry road - R4
• Night visibility-we road - RW4
• Daytime visibility - Q3
• Color coordinates - Y2

BLACK REMOVABLE MASKING TAPE

Deltaline® Black Temporary Removable (BTR) masking tape helps prevent the motorist confusion caused by temporary lane changes, and reduces hazards to work crews in construction zones. The tape applies easily over existing road markings without the use of heat or solvents. When construction is completed, the tape lifts off easily and quickly leaving the permanent road markings underneath clearly visible and undamaged.

Deltaline BTR tape, with its unique ridged pattern, allows permanent lane markings to be temporarily covered up with less contrast, even in difficult dawn and dusk light levels. A high performance polyurethane topcoat ensures superior durability for the life of the project.

The Brite-Line 100 Removable Blackout eliminates expensive, time-consuming, mechanical removal of permanent lane markings. Construction zones may be opened to traffic immediately after application.