InjectLine is a cost-efficient, cold-spray plastic line with wet retro reflectivity and durability for medium trafficked roads ranging from 5,000-20,000 vehicles per day. InjectLine is an economic and easy solution for improving your spray markings.
Combination of material and machinery
By combining PlastiRoute cold-spray plastic, coarse intermix material (glass beads and anti-skid material), fine UCme drop-on material and machinery, you get agglomerate-like structured Type II road markings in layer thickness of 0.75mm-1.5mm by using film thicknesses as low as 0.4mm. InjectLine is a thin layer marking with values equivalent to thick layer markings. The InjectLines are efficient in comparison to conventional Type II markings in terms of economic material usage and high-laying coverage.
InjectLine field tests in Germany
Field tests on the A8 between Munich and Salzburg show RL values between 130 and 230, depending on where the lines are placed on the road and the geometry of the road. The results are clear even after three years on a road where markings are frequently run over by snowploughs.
Long-term retro reflection
The mixture of glass beads and anti-skid material injected into the sprayed line secures the long term retro reflection and skid resistance. Small and well embeddable glass beads are sufficient for good retro reflection values (e.g. proved by P7 BASt-certificates, Germany).