Waterblasting Technologies Non-Destructive Road Marking Removal Systems and Pavement Marking Systems
The award-winning, Stripe Hog® is the most advanced road marking removal system in the industry today. No other system offers the outstanding combination of speed, cleanliness, safety, and cost efficiency, all on a single truck chassis.
The 40,000psi (2,750bar) Stripe Hog will remove all forms of durable road markings while causing minimal damage to asphalt and concrete surfaces. Its superior performance is a combination of an ultra high pressure water pump, vacuum recovery, and the separation of recovered liquid and debris.
Road marking removal using only water
The Stripe Hog operates with only clean water, no chemicals or additives are used. Thermoplastic, waterborne paint, oil-based paint, rubberized paint, epoxy, waffle tape, foil backed tape, and curing compound cannot begin to withstand the pulverizing force of the needle sharp water jets. With up to 3,150gal (1,1924l) of on-board clean water that can support a minimum of four and a half hours of continuous operation.
Secondary clean-up operations are completely eliminated with the Stripe Hog vacuum recovery system. You no longer need sweeper or vacuum trucks. The recovery of liquid and solid debris occurs immediately, simultaneous with the blasting process.
Because of the outstanding performance of the vacuum recovery system, new markings can be applied within 20 to 30 minutes. With the Stripe Hog, your removal project will be performed quicker, cleaner, without unnecessary support equipment, and with fewer employees. You will save money, enjoy better results, and have greater confidence in your care of the environment.
Separation of recovered liquid from solid debris
The time-consuming, complex disposal process that accompanies our competitors’ products does not apply to Stripe Hog. A 100 Micron Filter immediately separates the liquid from the debris so that the debris water can be quickly decanted in most places without leaving the jobsite.
The efficiency of our patent pending disposal process will shorten your down time and increase your continuous operating time. While disposal requirements may vary significantly from one country to the next, we guarantee that this process will be far less complicated and at a lower cost than all other systems on the market.
Self-contained traffic marking removal system
Mobility and maneuverability are essential to superior performance. Operating a system that requires trailers or additional support trucks will only increase your costs.
Trailers can also be an operational hazard even in the hands of the most skilled operators. Support trucks, such as vacuum, sweepers and tankers, require additional operators, fuel and maintenance. These can increase your operating costs dramatically.
With the Stripe Hog, all of the necessary components are on one truck requiring only one operator. With the optional tractor, two operators are needed. In either case, the job site set-up can be accomplished in 30 minutes or less.
Versatile and adaptable for all marking removal
Regardless of your marking removal needs, the Stripe Hog will accomplish the job quicker, cleaner, and more efficiently than other methods that attempt similar results.
Eight different models of the Stripe Hog offer a wide range of flexibility. The blasting head can be mounted to the truck or to a tractor that travels on the truck. It is possible to have both options on the same truck.
At our website, you will find more information about the various models of the Stripe Hog, and the options available with each one. You will also find information about the various applications where the Stripe Hog performs with outstanding results.
In a growing number of countries around the world, the Stripe Hog has become the leader in non-destructive road marking removal. We encourage you to visit our website for more information about our company and links to product videos. Demonstrations of the system can be arranged in the US, Europe and Australia.
Marking, surface preparation and grooving solutions
Hog Technologies has branched out and manufactures a wide variety of solutions for the roadway industry.
We now manufacture the Thermo Hog and Paint Hog to apply thermoplastic or waterborne pavement markings, the Surface Hog for surface preparation and cleaning, and the Rumble Hog for grinding, grooving, and cutting rumble strips.
Products and Services
Stripe Hog® SH8000
Stripe Hog SH8000 for the highway industry.
Stripe Hog® SK2000
SK2000 for cleaning and rejuvenation of the retro-reflectivity of thermoplastic and cold plastic markings in the highway industry.
Thermo Hog TH8000
This thermoplastic line marking truck comes fully equipped with a patent-pending processing plant called the Hog Melter that is capable of doubling your daily production.
Rumble Hog RH7500
The Rumble Hog RH7500 is a multi-purpose machine. It can grind pavement markings, cut grooves for in-laid pavement markings and cut rumble strips. During Grinding and Grooving, the Rumble Hog can make use of the offloading augur system to simultaneously vacuum debris and dump it along the side of the road.
Hog Rider® HT2500
Hog Rider® HT2500 enables easy removal of turn arrows, stop bars, crosswalk lines, and line removal in parking lots and parking garages.
Ground Hog HT1000SR
The HT1000SR is a self-rotated 40,000 psi walk behind blasting head with speed control for the removal of any durable marking or coating. It easily tethers to any of the Stripe Hog models.
Paint Hog PH8000
Customizable paint truck manufactured by Waterblasting Technologies. Customize your Paint Hog by choosing the chassis size, brand of paint and bead guns, size of paint pots and bead tanks, arrowboards, and your company colour scheme and receive it in 90 days after receipt of order.
Echuca-Moama Bridge Project
Yan Yean Road Upgrade, Plenty, Victoria
Waterblasting Technologies is addressing the needs of thermoplastic line striping companies with a new line of aftermarket melters.Read more
Webster dictionary defines a rumble strip as 'a set of grooves along the edge of a highway or across a road that cause noise and shaking when they are driven over and that are used to warn drivers that they need to slow down or are too close to the edge of the road'.Read more
Waterblasting Technologies introduced new innovations and products at ATSSA 2016.Read more
Waterblasting Technologies will be exhibiting this week at the WJTA (WaterJet Technology Association) Expo, promoting the revolutionary HOG VAC System at booth #537.Read more
Waterblasting Technologies is attending a variety of events over the next year, here's a few to mark in your diary.Read more
The purpose of this experiment was to determine the amount of time necessary for any moisture, introduced by the Stripe Hog Systems' marking removal method, to dissipate from concrete and asphalt surfaces.Read more
When you buy a water blasting system or any similar type of equipment, it is critical to your success to make sure that vendor has a customer support team that will be by your side 365 / 24 / 7. Support is important for whatever you may made need, whether it's continuing education, spare parts, or an upgrade to the latest and greatest innovation.Read more
Waterblasting Technologies recently took part in WWETT Trade Show 2015 in Indianapolis, US, between 23 to 26 February.Read more
Waterblasting Technologies, manufacturer of the world-renowned Stripe Hog® Waterblasting System, has opened up the opportunity for worldwide agents to assist in selling equipment.Read more
3170 SE Slater St
United States of America